Zhengzhou stamping parts processing, from the details to the development of technology to achieve results
Zhengzhou stamping parts processing, in the mold making, the upper and lower pads play a key role in the accuracy of the mold and the smooth production. So in the design and processing, it is necessary to consider thoroughly. Xiaoshuo shares a few points with you: 1. The upper and lower pads are generally made of Cr12. According to the needs, the thickness of the upper and lower backing plates of each mold is different, depending on the punching force. 2. If there are few punched holes, the upper and lower backing plates can be made a little bit thinner by 8-10mm. If there are more punching holes, they should be made thicker, generally about 17-20mm. 3. The lower backing board is mainly blanking holes, spring through holes, screw through holes, guide post vents, etc. Hardware, 15 years of ingenuity focused on stamping parts processing in Zhengzhou, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, 3 million punching times per day, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!
